HP Secure Encryption - Manual (Page 50)

Maintenance 50
Flashing firmware
If the firmware lock function is enabled, the firmware lock on the controller must be unlocked before
attempting to flash the controller. To disable the firmware lock function, see "Enabling/disabling the
firmware lock (on page 45 )."
Drives
Replacing a physical drive
No HP Secure Encryption-related steps are associated with this procedure. To replace a drive, see the server
maintenance and service guide.
Validating the number of encrypted drives for license compliance
Encryption Manager
1. Open Encryption Manager (" Opening Encryption Manager " on page 32 ).
2. Locate Encrypted Physical Drive Count, under Settings. The number to the right of this setting indicates
the number of encrypted physical drives.
3. Repeat for every controller with HP Secure Encryption enabled.
HP ESKM 3.1
Because all Drive Encryption Key names begin the same character sequence, run a query with the Choose
Key Name field filtered by Key Name and containing "HP_HDD" and "HP_SSD". For more information, see
"Running queries (on page
56 )."