HP Secure Encryption - Manual (Page 15)

Configuration 15
2. Click Perform Initial Setup.
The following screen appears.
3. Complete the following:
o Under Create Crypto Officer Password, enter, and re-enter the password in the fields provided.
o Under Encryption Mode, select either:
— Enable and Allow Future Plaintext Volumes: Allowing future plaintext volumes still requires
authentication by the Crypto Officer or the User before a plaintext volume can be created.
— Enable and Disallow Future Plaintext Volumes: This option prevents the creation of new plaintext
volumes on the controller. This setting can be changed later by the Crypto Officer. Selecting this
option does not prevent the migration of a set of drives with existing plaintext volumes to the
controller.
o Enter the Master Key name in the field provided. The Master Key name must be between 8 and 64
characters.