HP Secure Encryption - Manual (Page 28)

Configuration 28
• The HP ESKM 3.1 must be configured with a deployment user. For more information, see "Configuring
the HP ESKM 3.1 (on page 16 )."
• HP iLO must be installed and operating properly with the appropriate iLO-supporting license. For more
information, see the HP website (
http://www.hp.com/go/ilo ).
Connecting HP iLO to HP ESKM 3.1
If you intend to use a second HP ESKM 3.1 for a redundant key repository, complete the fields under
Secondary Key Server and select the Enable Enterprise Secure Key Manager Redundancy checkbox. HP
strongly recommends a redundant pair of HP ESKM 3.1 devices in a cluster configuration.
To connect HP iLO to the HP ESKM 3.1:
1. Log in to HP iLO using your server's credentials.
2. From the left side panel, expand the Administration menu and select Key Manager.