HP Secure Encryption - Manual (Page 29)

Configuration 29
3. The Enterprise Secure Key Manager configuration page appears.
4. Under Key Manager Servers, complete the following:
a. Primary Key Server:
— Enter the primary IP address of the HP ESKM 3.1 in the Address field.
— Enter the primary port number of the HP ESKM 3.1 in the Port field. This port number should
match the value on the HP ESKM 3.1, located on the Device tab under KMS Server Settings. SSL
should be enabled on the HP ESKM 3.1 as well.
b. Optional: Secondary Key Server:
— Enter the secondary IP address of the HP ESKM 3.1 in the Address field.
— Enter the secondary port number of the HP ESKM 3.1 in the Port field.
c. Optional: Select the Require Redundancy checkbox.
5. Click Apply. A confirmation message appears.