HP Secure Encryption - Manual (Page 42)

Operations 42
8. Array Details, Logical Drives, Physical Drives and Device Path specifications appear. Click Finish to
complete.
Converting plaintext volumes into encrypted volumes
NOTE: The controller must read and rewrite the entire volume in order to complete the
conversion process. Conversion may take some time to complete, especially if there is competing
drive activity from the host system.
To convert plaintext volumes into encrypted volumes:
1. Open Encryption Manager (" Opening Encryption Manager " on page 32 ).
2. Log in to Encryption Manager (" Logging into Encryption Manager " on page 32 ).
3. Under Controller Devices, click Arrays.
4. Select the plaintext volume.