HP StorageWorks XP Remote Web Console Software - Manual (Page 67)

LUN Configuration and Security Manager XP user guide for the XP1024/XP128 67
Capacity unit list
The Capacity Unit list allows you to select the unit (MB, Cyl, or block) to display for volume capacity.
When you manipulate mainframe volumes, you can only select Cyl.
Buttons
• Apply: Registers the CVS settings
• Cancel: Cancels the CVS settings
• LDEV Status: Displays the current volume status
NOTE: Currently, the Shredding Param and Download buttons are not supported.
Viewing CVS configuration information
Use the Customized Volume pane and its associated panes to view the current CVS configuration
information:
• View the VDEV and LDEV configuration information on the Customized Volume pane. This pane shows
an outline of group numbers, parity group numbers, RAID levels, and VDEV numbers and a table of
CU:LDEV numbers, emulation types, LDEV capacities, and path settings of VDEVs selected in the
outline.
• View the LDEV number setting information from the Install CV, Make Volume, and Volume Initialize
panes. In the table, gray indicates LDEV numbers that are already in use, white indicates unused LDEV
numbers, and blue indicates available LDEV numbers.
Viewing concatenated parity groups
1. In the Customized Volume pane, select a set of parity groups from the Parity Group - LDEV tree and
right-click. If the parity groups are concatenated, the Concatenation List command is available in the
shortcut menu.
2. Select Concatenation List. The Concatenation List dialog box appears.
3. Click OK.
Converting volumes to space (Volume to Space)
Use the Volume to Space function to convert logical volumes to space (free areas).
CAUTION: The Volume to Space operation destroys data on the logical volumes that are converted.
1. From the Customized Volume pane, select a disk group, a parity group, and a VDEV in the Parity
Group - LDEV tree. The Parity Group - LDEV table displays information about LDEVs in the selected
VDEV.
2. Select one or more LDEVs (normal or custom volumes) you want to convert to space.
Format Volume is being formatted.
Correction Access Volume’s access attribute is being changed.
Copying Volume’s data is being copied.
Read Only Hosts can only read the volume. Hosts cannot write any data to the volume.
Unknown System does not recognize the volume’s status.
Table 26 Volume status (continued)
Status Description