Deleting user information of hosts, 24 change user information (host) dialog box, Specifying user information of ports (when – HP StorageWorks XP Remote Web Console Software User Manual
Page 48: Performing mutual authentication)
48
LUN Manager for the XP1024/XP128
2.
In the User Information (Host) table, right-click a user information item that you want to change and
select Change User Information (Host). The Change User Information (Host) dialog box appears.
Figure 24
Change User Information (Host) dialog box
3.
Change the user information of the host as required in the Change User Information (Host) dialog box.
You can change the contents of User, Secret, and Enable authentication check box. For details on
characters and length you can use in the user name or secret, see ”
Registering user information of
4.
Click OK. The specified user information is added in blue in the User Information (Host) table.
5.
Click Apply. A confirmation message appears.
6.
Click OK. The setting is applied to the disk array.
Deleting user information of hosts
1.
In the Port tree, expand the iSCSI folder and select a port on which the user information you want to
delete is registered. The user information of hosts currently registered on the selected port appears in
the User Information (Host) table.
2.
In the User Information (Host) table, right-click a user information item that you want to delete and
select Delete User Information (Host). A confirmation message appears.
3.
Click OK.
4.
Click Apply. A confirmation message appears.
5.
Click OK. The user information is deleted from the disk array.
Specifying user information of ports (when performing mutual authentication)
To perform mutual authentication, you need to specify user information on the disk array ports. You must
provide unique user information for each port. You can change the specified user information of ports the
same way you specified them initially.
1.
In the Port tree on the User Authentication tab, select a port whose user information you want to
specify.
The currently registered user information for the selected port appears in the User Information (Port)
table below the User Information (Host) table.