HP StorageWorks XP Remote Web Console Software - Manual (Page 45)

LUN Configuration and Security Manager XP user guide for the XP1024/XP128 45
User Authentication tab
The User Authentication tab includes the port tree and User Information (Host) table.
Port tree
This tree displays information about user authentication on each port. When you select a port from this
tree, the User Information (Host) table on the right displays user information of hosts registered on the port.
In addition, the User Information (Port) table below the User Information (Host) table displays user
information of the selected port.
The iSCSI folder appears below the Subsystem folder located at the top of the tree. If you double-click the
iSCSI folder, iSCSI ports in the disk array appear as icons. The port name and user authentication status
to the right of each icon:
• (Authentication:ON): The port performs host authentication.
• (Authentication:OFF): The port does not perform host authentication. This is the default value.
NOTE: The iSCSI folder is displayed only if the disk array contains an iSCSI channel adapter.
The following icons are used to indicate the port’s user authentication status.
User Information (Host) table
The User Information (Host) table, on the top right of the User Authentication tab, displays user information
of hosts that are allowed to connect to the iSCSI port specified in the tree. You can register up to 64 user
information items in this table.
The table contains the following columns:
• iSCSI Name: Displays iSCSI names of host bus adapters.
• Protocol: Indicates the user authentication protocol. This is always CHAP.
• User: Indicates user names of hosts. When no user name is defined, this column is blank.
• Authentication: Indicates whether to perform authentication for the host. If the host is a target of user
authentication, Enable appears. If the host is not a target of user authentication, Disable appears.
User Information (Port) table
The User Information (Port) table, on the bottom right of the User Authentication tab, displays user
information of the port selected in the tree.
The table contains the following columns:
• iSCSI Name: Displays the iSCSI name of the port.
• User: Indicates the user name of the port. When the user name is not defined for a port, this column is
left blank. If you use upgraded LUN Manager and the port performed host authentication before
upgrading, Administrator appears as the default.
Buttons
• Apply: Applies settings in the pane to the disk array.
• Cancel: Cancels settings in the pane.
Table 13 iSCSI port icons for User Authentication operations
Icon Status
CLX-Y (Authentication:ON) The port authenticates hosts
CLX-Y (Authentication:OFF) The port does not authenticate hosts