HP Designjet 9000s Printer series - Manual (Page 82)

10. Make sure you also moisten both ends of the sponge under the belt on each side.
1. Belt
2. Dropper
Capping unit cleaning
This cleaning procedure will remove any dried ink and particles from the capping unit.
1. Press the ONLINE key.
2. Press the SHIFT key to display the PH.MAIN menu.
3. Press the ▲ key to select the PH.MAIN menu.
4. Scroll to the CAP CLEANING option using the ▼ key and press OK to select.
5. Press OK again to confirm your selection.
The carriage will automatically move to the wiping side of the printer so that the Capping Unit can
easily be accessed. The front panel displays CARRIAGE MOVING — PLEASE WAIT.
CAUTION Once the carriage is out of the capping unit, the cleaning procedure must be
done as quickly as possible to avoid permanent damage to the printheads. The printer
will emit an acoustic warning (beep) while the carriage is out of the capping unit.
72 Chapter 6 How do I maintain the printer? ENWW
How
do I maint
ain t
h
e
print
er?