Heater f/w version display (heater fw ver), System date setting (system date), System time setting (system time) – HP Designjet 9000s Printer series User Manual

Page 177: Factory default setting (factory default), Usb address (usb address)

Parameters: none.

Heater F/W version display (HEATER FW VER)

This option displays the heater firmware version. If the heater cannot be recognized, "--.-" is displayed.

Parameters: none.

System date setting (SYSTEM DATE)

This option sets system date used in the unit in YY (year), MM (month), DD (day).

Parameters: 00/01/01 to 99/12/31.

System time setting (SYSTEM TIME)

This option sets the time for your printer.

Parameters: 00 : 00 to 23 : 59.

Factory default setting (FACTORY DEFAULT)

This option sets all parameter values to default factory settings.

Parameters: none.

USB address (USB ADDRESS)

This option displays the printer USB address.

Parameters:none.

ENWW

The SETUP menu

167

Tell me about

ront

panel menus