HP Designjet 9000s Printer series - Manual (Page 107)

NOTE Select a mean value if the media advance value is different in every color. If you
have an image that uses one particular color, then set the value based on that color.
Set a mean value if the media advance value differs between the left and right sides of
the media.
Different values between the left and right sides of the media may be caused by skew.
6. From the printed result, select the best media advance calibration value.
7. Press the ▼ key, and then the OK key to display the current media advance calibration value.
8. Enter the media advance calibration value, and press the OK key.
Select the number you want to change by using the ◄ and ► keys and change the numeric value
using the ▲ and ▼ keys.
If you need more precise media advance calibration, then you will need to print the DETAIL pattern
as follows:
9. Press the ▼ key, and then OK.
10. Press the ▲ or ▼ keys to select the DETAIL pattern.
Select the same print mode as for the ROUGH pattern you printed previously.
11. Press the OK key twice to print the DETAIL pattern.
12. From the printed result, select the best media advance calibration value.
Five patterns are printed in 0.06% steps in a range of -0.12% to +0.12%.
13. Press the ▼ key, and then the OK key to display the media advance calibration value.
14. Enter the media advance adjustment value, and press the OK key.
ENWW Calibrate the printer 97
How
do I
get the
best image
qualit
y?