Operator error messages – HP Designjet 9000s Printer series User Manual
Page 120
POC error messages
Problem: an unrecoverable error has occurred in the engine section. This error message appears when
an error is detected during self-diagnosis when the power is turned on.
Solution: contact HP Support. Make a note of the error code shown on the front panel.
Engine error messages
Problem: an unrecoverable error has occurred in the network controller section (hardware failure).
Solution: contact HP Support. Make a note of the error code displayed on the front panel.
System error messages
Problem: an unrecoverable error has occurred (firmware failure).
Solution: contact HP Support. Make a note of the error code displayed on the front panel.
Operator error messages
The following errors can be corrected by the operator.
Ink cartridge
X: L (left), R (right)
YY: Y, M, C, K, Lm, Lc
Problem: there is no ink.
Solution: follow the instructions on the front panel. See How do I... Replace an ink cartridge.
110
Chapter 8 The problem is… (troubleshooting topics)
ENWW
The problem
is…
(troubleshoot
ing
t
opics)