HP Designjet 9000s Printer series - Manual (Page 24)

● Use only an HP waste ink bottle. The bottle must be installed according to instructions or waste ink
may overflow. An HP waste ink bottle must always be installed before turning the printer ON.
Automatic and manual service cycles produce waste ink that must be contained in an HP waste ink
bottle. Do not remove the cap from its tether to the HP waste ink bottle. The cap is needed to
properly seal the HP waste ink bottle for disposal. Keep the HP waste ink bottle upright. Do not
place on tables or shelves where it could fall. Waste ink is combustible. Keep an HP waste ink
bottle containing waste ink away from open flames, sparks, or other sources of ignition. The level
in the HP waste ink bottle must be checked by visual inspection to prevent overflow. If the waste
ink level is above the indication line, the bottle must be replaced with an empty HP waste ink bottle.
● Place a sheet of paper under the HP waste ink bottle on the floor when removing a bottle
containing waste ink. This will help clean up any ink spills. If soaked with ink, treat the paper as a
combustible material and dispose of properly.
● Do not store HP ink cartridges in direct sunlight. Store HP ink cartridges in a cool, dry place. This
prevents deterioration of the ink during storage.
14 Chapter 1 Introduction ENWW
Int
roduct
ion