HP ProLiant DL380 G5 Server - Manual (Page 72)

• FPM (Fast-Page Mode)
• EDO (Extended Data Out)
• BEDO (Burst Extended Data Out)
• Synch DRAM (Synchronous DRAM)
• Unknown
System Resources
This section lists the resources in use by the device or client workstation in the following order:
• IRQ Numbers—The Interrupt Request number displays, followed by the slot number of the board that is using this
interrupt.
• Port Address—The port address range displays, followed by the slot number of the board that is using this I/O
port range.
• DMA Channels—The DMA channel displays, followed by the slot number of the board that is using this channel.
• Memory—The memory range displays, followed by the slot number of the board that is using this memory.
NOTE: A slot number of "system" in the device, or “embedded” in the client workstation, refers to slot
zero.
System Summery
HP System Insight Manager automatically collects configuration information for all devices in the Responsible Device
List. This information is used by filtering subsystems, which allow you to filter your devices on such things as processor
type or network operating system. The type of information collected during Configuration Data Collection is useful for
asset management.
The following System Information is displayed. Information varies depending on the device type:
• General Information
• Product name displays the type of device or client PC.
• Operating system displays the type of operating system installed on the device.
• Server Role displays a free form text field intended for briefly describing the system's function if available.
• SMBIOS Version displays the version of SMBIOS on the device if applicable and available.
• Machine ID (System Board) displays the identification number of the machine.
• Type of expansion bus identifies the device or client bus type as EISA, EISA/PCI, PCI ,PCI-X or PCI-Express.
• Description Information
• System Name displays the name of the device.
• Description displays a description of the device, including hardware and software.
• Network Management Up Time displays the amount of time since the network management portion of the
system was last reinitialized.
• Contact Information displays the name of the person to contact about this device.
• Location displays the physical location of the device.
• IP Address displays the network location of the device.
• Power Management
• This section displays the state of power management on the system (enabled or disabled).
• Asset Control Information
• Serial Number displays physical the serial number of the device or client system board. Use this for
identification and registration purposes. N/A appears if you do not have a device or client that supports the
asset management feature. Use the System Configuration Utility (or the appropriate utility for your device or
client) to enter a system serial number if one does not appear and you have a device or client that supports the
asset management feature.
• Serial Number (Logical) displays the Logical serial number of the device or client system board. This field won't
be available if device does not supports this feature.
• Product ID displays a unique type of Product and is used for reorder purposes.
• Asset Tag displays a changeable asset control number and is used for identification purposes.
• Board Rev displays the system board revision number.
• Monitor Model displays the monitor model. Use this item for identification purposes.
Agent information 72