HP ProLiant DL380 G5 Server User Manual
Page 54
•
Path—Indicates the path to the storage system. Each path is identified by a descriptor. For example, "Port 2E
Box 1" indicates a path from the host adapter external port number 2 ("Port 2E") to the first box.
•
Status—Indicates the status of the data path. Possible values are:
•
OK—The path is operational.
•
Link down—The path is not operational.
•
Unknown—The path status cannot be determined.
•
Role—Indicates the role of this path in the configuration. Possible values are:
•
Active—This path is the preferred data path to the storage system.
•
Alternate—This path is the alternate data path to the storage system.
•
Unknown—The role of this path cannot be determined.
IDE controllers
Select an IDE controller entry from the Mass Storage list to display a submenu containing separate entries for IDE
controller information, IDE ATA disk drives connected to the controller, and IDE ATAPI devices connected to the
controller. Device types include disks, DVD/CD-ROM drives, tape drives, processors, scanners, optical drives,
WORM drives, and so on. The following items might appear depending on the type of controller:
•
IDE controller information
•
IDE ATAPI devices
•
IDE ATA disk drives
•
IDE ATA logical drives
IDE controller information
Select a controller entry from the Mass Storage list to display the following information:
•
Model—Displays the controller’s model string, used for identification purposes
•
Slot—Displays the physical slot number where the controller is installed in the system or N/A if slot number is
not available
•
Firmware Version—Displays the firmware version of the controller
IDE ATAPI devices
The information displayed for each IDE ATAPI device entry in the submenu includes condition graphic and device
location: Primary or Secondary channel, Master device 0 or Slave device 1. If the Storage Agents cannot determine
the channel then “Channel unknown” displays. If the device position cannot be determined, “Device unknown”
displays and the driver software or the Storage Agents might need to be updated. Select any of the devices from the
submenu to display more information about the devices. The following information displays for all devices:
•
Device Type—Identifies the type of ATAPI device. The following values are valid:
•
Disk—A direct-access device, such as a disk drive.
•
Removable Media Disk—A removable media device, such as a floppy disk drive.
•
Tape—A sequential-access device, such as a tape drive.
•
Printer—A printer device.
•
Processor—An operating device, such as a central processing unit or ProLiant Storage System.
•
WORM drive—A write-once, read-many times device.
•
DVD/CD-ROM—A DVD-ROM or CD-ROM device. It can be a read-only device or a read-write device.
•
PD-CD Drive—A combination CD-ROM drive and removable media read-write drive.
•
Scanner—A scanning device.
•
Optical—An optical memory or storage device.
•
Jukebox—A media-changer device, such as a tape or CD library.
•
Communications Device—A communications device, such as a LAN bridge.
•
Unknown—The Storage Agents could not determine the device type. You might need to upgrade your
support software or Storage Agents.
•
Model—Displays the model of the device.
•
Firmware Revision—Displays the firmware version of the device.
IDE ATA disk drives
The information displayed for each IDE ATA disk drive entry in the submenu includes condition graphic and disk drive
location: Primary or Secondary channel, Master device 0 or Slave device 1. If the Storage Agents cannot determine
Agent information 54