HP ProLiant DL380 G5 Server - Manual (Page 29)

Management Processor
Integrated Lights-Out (iLO) NIC
The NIC section displays the following information about the NIC in the iLO. Not all fields are supported by all
models of Remote Insight Board and/or NIC.
• Model—Displays the NIC model.
• DNS Name—Displays the fully qualified DNS name assigned to this iLO.
• Type displays if the NIC is embedded or pcmcia and whether it is ethernet or token ring.
• IP Address—Displays the IP address for this NIC.
• Subnet Mask displays the subnet mask for this NIC.
• Gateway—Displays the default gateway configured for this NIC.
• Status—Displays if this NIC is enabled or disabled.
• Physical Address—Displays the MAC address for this NIC.
• Duplex—Displays if the controller is in half duplex, full duplex or does not support a duplex state.
• Link Status—Displays Remote Insight/Integrated Lights-Out Network Interface Controller condition. The following
values are possible:
• Other
• Ok
• Degraded
• Failed
• Speed—Displays the speed of the NIC.
• Max Packet Size—Displays the maximum packet size of the NIC.
• Transmit/Receive Statistics—Displays the following set of statistics for the NIC:
• Bytes—Displays the number of bytes transmitted/received.
• Total Packets—Displays the number of packets transmitted/received.
• Unicast Packets—Displays the number of unicast packets transmitted/received.
• Non-Unicast Packets—Displays the number of non-unicast packets transmitted/received.
• Discarded Packets—Displays the number of packets discarded during transmit/receive.
• Error Packets—Displays the number of error packets found during transmit/receive.
• Unknown Protocols —Displays the number of unknown protocol packets received.
• Queue Length—Displays the number of outstanding packets in the transmit queue.
Integrated Lights Out
• Model—Displays the edition of the iLO in the server.
• Hardware Version—Displays the Hardware revision of iLO model on the server.
• Serial Number—Displays the iLO serial number.
• Firmware Version—Displays the iLO firmware version and date.
• Active License Type—Displays the iLO license type actived.
• License Key displays the activated iLO license key.
• iLO Security Override Switch—Displays the Integrated Lights-Out security state. The iLO Security Override
Switch field is supported only in case of Integrated Lights-Out models.
• Mouse—Displays whether the mouse is connected to Remote Insight Board. The Mouse field is not supported for
Remote Insight Lights-Out models.
• Keyboard—Displays whether the keyboard is connected to Remote Insight Board. The Keyboard field is not
displayed for Remote Insight Lights-Out models.
• Interface Status—Displays the iLO interface status.
Alarm
If your system supports Remote Insight Lights-Out Edition, the following alerts are available:
• Status—Indicates if alerts are enabled at the iLO. This is a global flag and governs all users. If alerts are
disabled, alarms are not sent.
Agent information 29