HP Insight Management-Software - Manual (Page 97)

Powering down a bay
To view a window displaying the power status of a bay, click the number in the Bay# column. You
can power down and power up the server inside that bay by clicking the buttons.
Figure 46 Window displaying the power status of a bay
To remotely power down a bay:
1.
Click the Bays tab.
2. To determine the power status of the bay, click the bay number. A status window appears.
3. Depending on the power status of the bay, perform one of the following steps:
•
If the bay is currently powered down, then proceed to the Assigning a server profile to
a bay procedure section.
•
If the bay is currently powered up, then click Momentary Press, which automatically
powers down the bay.
•
If the bay is currently powered up and clicking Momentary Press does not power down
the bay, then click Press and Hold.
CAUTION: Only use the Press and Hold option when other attempts at powering down the
bay have failed, such as attempting to shut down from the physical bay instead of remotely.
Powering down a bay 97