HP Officejet 7410 All-in-One Printer - Manual (Page 48)

Use the print options menu to set photo print options
The Print Options menu gives you access to a variety of settings that affect the way
photos print, including number of copies, paper types, and more. The default
measurements and sizes vary according to country/region.
1
Insert a memory card into the appropriate slot on your HP all-in-one.
2 In the Photo area, press Menu .
The Photo Menu appears.
3 Press 1 to access the Print Options menu, and then press the number next to the
setting you want to change.
Setting Description
1. Number of Copies Lets you set the number of copies to be printed.
2. Image Size Lets you set the size at which you want the image
printed. Most choices are self-explanatory, but two
require some explanation:
Fill Entire Page and Fit to
Page .
The Fill Entire Page setting scales the image to cover
all of the printable area on the paper. If you inserted
photo paper in the input tray, there will not be a white
border around the photo. Some cropping may occur.
Fit
to Page scales the image to cover as much of the page
as possible while keeping the original aspect ratio
without cropping. The image is centered on the page
and is surrounded by a white border.
3. Tray Select Lets you select the input tray (front or rear) that the
HP all-in-one should use. This setting is only available if
a rear tray is detected when you turn on the HP all-in-
one.
4. Paper Size Lets you select the paper size for the current print job.
The
Automatic setting defaults to a large (letter or A4)
and small 10 by 15 cm (4 by 6 inch) paper size that
varies by country/region. When
Paper Size and Paper
Type are both set to Automatic , the HP all-in-one
selects the best print options for the current print job.
The other
Paper Size settings let you override the
automatic settings.
5. Paper Type Lets you select the paper type for the current print job.
The
Automatic setting lets the HP all-in-one detect and
set the paper type automatically. When Paper Size and
Paper Type are both set to Automatic , the HP all-in-
one selects the best options for the current print job. The
other
Paper Type settings let you override the automatic
settings.
User Guide 45
Memory
Card and PictBridge