HP Officejet 7410 All-in-One Printer - Manual (Page 108)

This setting scans and sends only the front of the cover page, and scans and
sends both sides of the rest of your pages. This prevents a blank page from
accidentally being sent when you include a cover page.
– If you want to send two-sided originals and you do not have a cover page,
press
3 to select 2-Sided Original .
This setting scans and sends both sides of all of your pages. Use this setting if
all of your originals have text on both sides.
Note If you select 2 or 3 , make sure you do not remove the originals from the
output area before they are scanned on both sides. The HP all-in-one
scans the front side of an original, places it in the output area, and then
picks it back up to scan the opposite side. After both sides of every
page have been scanned, you can remove the originals.
5 Press Start Fax Black .
Note The option you select applies only to the current fax. If you want all future
faxes you send to use this same option, change the default. For more
information, see
Set new default settings .
Send a fax manually from a phone
You can make a phone call and talk with the recipient before you send your fax. This
method of sending a fax is called manually sending a fax. Sending a fax manually is
useful if you want to make sure the recipient is available to receive the fax before you
send it.
The phone must be connected to the "2-EXT" port on the back of the HP all-in-one. For
information on setting up your HP all-in-one with your phone, see
Fax setup .
1 Load your originals face up in the document feeder tray with the top of the page on
the left.
2 Dial the number by using the keypad on the phone that is connected to your
HP all-in-one.
Note You must use the keypad on the phone to dial the number. Do not use the
keypad on the control panel of the HP all-in-one.
3 Do one of the following:
–
If after dialing the number you hear fax tones, press Start Fax Black or Start
Fax Color within three seconds to send the fax.
– If the recipient answers the telephone, you can engage in a conversation
before sending your fax. Once you are ready to send your fax, press the
Start
Fax Black or Start Fax Color button on the control panel.
Send a fax using redial
You can use redial to send a fax to the last fax number dialed from the control panel.
1
Load your originals face up in the document feeder tray with the top of the page on
the left.
2 Press Redial/Pause .
The last number dialed appears in the color graphics display.
3 Press Start Fax Black or Start Fax Color .
User Guide 105
Use the
fax
features