HP Officejet 7410 All-in-One Printer - Manual (Page 24)

The Bluetooth menu appears.
5 Press 5 .
This selects Security Level and displays the Security Level menu.
6 Press 1 to select High .
High level security requires authentication.
Note The default security setting is Low . Low level security does not require
authentication.
Passkey authentication is now set for your HP all-in-one.
Set your HP all-in-one to be invisible to Bluetooth devices
You can set your HP all-in-one to be either Visible to all Bluetooth devices (public) or
Not visible to any (private):
● Visible to all : Any Bluetooth device within range can print to the HP all-in-one.
● Not visible : Only Bluetooth devices that have stored the device address of the
HP all-in-one can print to it.
To set your HP all-in-one to be Not visible
1 Press Setup on the control panel of your HP all-in-one.
The Setup Menu appears on the color graphics display.
2 Press 0 , then press 4 .
This displays the Bluetooth menu and then selects Accessibility .
The Accessibility menu appears.
Note Your HP all-in-one ships with a default accessibility level of Visible to all .
3 Press 2 to select Not visible .
Your HP all-in-one is inaccessible to Bluetooth devices that have not stored its
device address.
Reset Bluetooth settings on your HP all-in-one
If you want to reconfigure all of the Bluetooth settings on your HP all-in-one, you can
reset them to factory defaults by performing the following:
1
Press Setup on the control panel of your HP all-in-one.
The Setup Menu appears on the color graphics display.
2 Press 0 , then press 6 .
This displays the Bluetooth menu and then selects Reset Bluetooth .
Note Only select Reset Bluetooth if you want all of your HP all-in-one Bluetooth
settings returned to factory defaults.
Use Webscan
Webscan lets you perform a basic scan through your HP all-in-one using just a Web
browser. It also lets you perform the scan from your HP all-in-one without the device
software installed on your computer. Just enter the IP address of the HP all-in-one in a
Web browser. The embedded Web server Home page appears in your browser. In the
left hand column, under Applications, select Scan. For more information on printing a
network configuration page to obtain the IP address of your HP all-in-onet, see the
Network Guide that came with your device.
User Guide 21
Connection information