HP Designjet 8000 Printer series - Manual (Page 86)

Wiper liquid bottle replacement
NOTE When the wiper liquid has been installed for some time the liquid will no longer be clear.
This is quite normal because the liquid becomes tinted as it is used to clean the wiper blade.
Wiper liquid ensures that the wiper blade can correctly clean the printheads. The wiper liquid level should
be checked every month or when the following message is displayed:
WARNING! Make sure that the wiper liquid does not drip onto other parts of the printer.
1. Press the ONLINE key.
2. Press the SHIFT key to display the PH. MAIN menu.
3. Press the key to select the PH. MAIN menu.
4. Scroll to the REPLACE WIPE LIQUID option using the key and press OK to select.
5. Press OK again to confirm your selection.
76 Chapter 6 How do I maintain the printer ENWW
H
o
w
do
I
ma
in
ta
in
t
h
e
pri
n
ter