HP Designjet 8000 Printer series - Manual (Page 33)

5. At the rear of the printer, loosen the stop screw (1) and position the left (3) and right (2) media roll
holders so that the roll stops on each end of the roll can be placed on the holders.
NOTE Before lifting the roll of media onto the media roll holders, decide if you want to print
on the media face up or face down. Media can be fed through the media path from over the
roll (face up) (1) or from under the roll (face down) (2).
6. Lift the roll of media (1) onto the media roll holders.
ENWW Install a media roll in the printer 23
How do
I load
/u
nlo
ad m
edia