HP Designjet 8000 Printer series - Manual (Page 30)

Install a media roll in the printer
CAUTION Do not touch heater surfaces in the media path. This may cause burns.
Handle media rolls with care. They can be heavy and difficult to move in confined spaces. In some
cases, two people should move and install media rolls. Dropping a media roll could cause
personal injury or damage to the printer.
NOTE You can increase or reduce the printhead height depending on the thickness of the media
you are using. See How do I… Change the printhead height
.
NOTE The HP Designjet 8000s Take-Up Reel Kit (Q6681A) is an optional accessory. See Tell
me about… Ordering accessories
.
Make sure the printer wheels are locked (the brake lever is pressed down) (1) to prevent the printer from
moving.
The printer's front panel messages will guide you through the process of loading media.
The printer comes with two roll stops and spacers that are inserted into each end of the roll core tube.
20 Chapter 3 How do I load/unload media ENWW
How
do
I load
/u
nlo
ad m
edi
a