HP Designjet 8000 Printer series - Manual (Page 110)

7. Open the carriage maintenance cover (1).
8. Clean the carriage base with a soft cloth.
9. Close the carriage maintenance cover (1) and close the front cover (2).
The printhead carriage will return to the right maintenance area (home position) automatically.
NOTE Use the NOZZLE PRINT to check that there are no printhead nozzles out after cleaning
the carriage base.
Clean the front cover and media feed
NOTE Do not attempt to remove dust from media by blowing it off. This may affect print quality.
CAUTION Wipe the printer clean with a soft cloth. A cloth moistened with a neutral detergent
may be used. Do not allow liquid to enter the printer. This may create risk of fire and electrical
shock and cause a malfunction. Do not clean the printer with benzene or paint thinner. This may
damage the paint.
100 Chapter 6 How do I maintain the printer ENWW
H
o
w
do
I
ma
in
ta
in
t
h
e
pri
n
ter