HP Designjet 8000 Printer series - Manual (Page 68)

Alternatively, when the “Printer Ready” message is shown on the Front Panel, do one of the following:
1. Hold down the key to feed media forwards through the printing path.
While the key is pressed, the roll media advances. If cut sheet is loaded, it is discharged.
2. Hold down the key to rewind the media.
While the key is pressed, the roll media rewinds.
Use manual nesting
When printing a small-sized image (1), such as A4, on a 64-inch width roll, a large area of media is left
blank. You can rewind the roll and nest an image in the blank area.
NOTE The manual nesting feature can only be used with roll media.
To use manual nesting:
1. Press the ONLINE key.
2. Press the SHIFT key to display the REWIND option.
NOTE Rewind the media only when the image is dry to avoid smearing.
58 Chapter 4 How do I… (printing topics) ENWW
How do
I… (
p
rint
ing
t
o
p
ics)