HP Designjet 8000 Printer series - Manual (Page 193)

Media advance calibration print
Select MEDIA ADV PRINT to print a calibration pattern that will indicate optimal media advance values.
Two patterns are available: the ROUGH pattern prints a media advance pattern in 0.25% steps between
99.0 and 101.0 %; the DETAIL pattern prints a media advance pattern in 0.10% steps starting from the
current setting ±0.20%.
Use the ROUGH pattern to obtain your initial values and if greater accuracy is required, use the DETAIL
pattern. The print mode selected will also affect media advance calibration patterns.
Press the CANCEL key to interrupt printing.
Parameters: ROUGH or DETAIL
● NORMAL — standard and high speed print modes (720 x 720 dpi – 8 passes).
● H-QUALITY — high quality print mode (720 x 720 dpi – 16 passes).
● H-DENSITY — high density print mode (720 x 720 dpi – 16 passes).
● DRAFT — draft print mode (360 x 720 dpi – 4 passes).
● FINE DRAFT — fine draft print mode (540 x 720 dpi – 6 passes).
● 3 TIMES — high quality, high density print mode (720 x 720 dpi – 24 passes).
Back feed adjustment print
This option prints a pattern so that you can adjust how much back feed is applied to a media type that you
are loading.
Select a parameter based on your print mode.
Parameters:
● NORMAL — standard and high speed print modes (720 x 720 dpi – 8 passes).
● H-QUALITY — high quality print mode (720 x 720 dpi – 16 passes).
● H-DENSITY — high density print mode (720 x 720 dpi – 16 passes).
● DRAFT — draft print mode (360 x 720 dpi – 4 passes).
ENWW Media advance calibration 183
Tell me
ab
ou
t…
(
m
enu
s)