HP Designjet 8000 Printer series - Manual (Page 105)

CAUTION Do not open or close the front covers or change the position of levers while the
cleaning process is being performed or the operation may have to be restarted from the beginning.
This will result in the waste of the cleaning liquid. If the cleaning process has to be restarted,
new cleaning liquid cartridges will be needed.
1. Press the ONLINE key.
2. Press the SHIFT key to display the PH. MAIN menu.
3. Press the key to select the PH. MAIN menu.
4. Scroll to the INK SYSTEM OPT option and press OK .
5. Scroll to the CLEAN INK SYS option and press OK .
6. Press OK to confirm your selection.
7. When the front panel displays the waste ink bottle warning message, check whether the waste ink
bottle is present and make sure it is empty.
CAUTION Your waste ink bottle should be empty. Have available an empty waste ink
bottle.
8. Press the OK key once the waste ink bottle has been checked and follow the instructions on the front
panel.
Install the Cleaning Liquid cartridges when prompted by the front panel.
After cleaning the ink system, the ink charge process must be performed (see How do I… Charge the ink
system ).
Prepare for extended power down (two to four weeks)
CAUTION If you physically need to relocate the printer to a new location, please contact HP
because this must only be done by a trained professional.
ENWW Prepare for extended power down (two to four weeks) 95
How do
I mai
n
tai
n
the
print
er