HP Designjet 8000 Printer series - Manual (Page 53)

Tip If necessary, when the Front Panel displays the “Printer Ready” message, feed media
through the printer using the key. You can also use the FORM FEED menu to feed media
through the printer. Do not pull the media manually through the printing path . This may skew the
media loaded in the printer. After cutting the media you can rewind excess media by using the
key or the REWIND menu.
The media cutter should be positioned so that the cutting direction arrow is pointing towards the media. If
the arrow is pointing in the opposite direction to the media, and the cutter path is obstructed by the media,
you can remove the cutter from its holder. To remove the media cutter from its holder:
1. Apply pressure to the sides of the cutter (1) and pull (2).
ENWW Use the media cutter 43
How do
I load
/u
nlo
ad m
edia