HP Designjet 8000 Printer series - Manual (Page 124)

printer . Banding may be present in the form of white lines (as in the image above), or in the form of darker
lines.
If you still see banding in all colors after performing the calibrations, then try adjusting the heater
temperature and/or print mode settings. See How do I…
Adjust heater and print mode settings .
Manage media types
You can create new media types, or you can modify or delete existing media types by using the MEDIA
REG menu.
Tip We recommend that you do not modify the preset media types that came with your printer.
You can copy a preset media type with characteristics that are similar to the new media that you
want to use, and use the copy to create a new one before changing the settings. This means that
you will only have to make changes to one or two parameters and you will not need to set new
values for all of the parameters.
Copy a media type to create a new one
1. Press the ONLINE key.
2. Press the key to enter the MEDIA REG menu.
3. Select the COPY MEDIA option with the and keys, and press the OK key.
4. Select a media number using the and keys, and press the OK key.
Only numbers for media types that already exist are displayed.
5. To create a new media type from the copy, press the key to enter the MEDIA REG menu.
6. Select the PASTE MEDIA option with the and keys, and press the OK key.
114 Chapter 7 How do I get the best image quality ENWW
How do
I get the
best
image
q
ualit
y