HP Designjet 8000 Printer series - Manual (Page 168)

WARNING! Avoid contact between ink and skin, eyes, and clothing.
Immediately wash skin with soapy water.
Remove clothing soaked with ink from contact with skin.
Use an approved eye wash station if ink is splashed into eyes and consult a doctor if necessary.
If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor if
necessary.
Do not swallow ink. If swallowed, do not induce vomiting and seek immediate medical attention.
WARNING! Use only an HP Waste Ink Bottle. The bottle must be installed according to
instructions or waste ink may overflow.
An HP Waste Ink Bottle must always be installed before turning the printer ON. Automatic and
manual service cycles produce waste ink that must be contained in an HP Waste Ink Bottle.
Precautions for handling the waste ink bottle
WARNING! Always securely replace the cap on a full or partially-full HP Waste Ink Bottle after
removing it from the printer to prevent ink spills.
The HP Waste Ink Bottle contains organic solvents and must be disposed of in compliance with
all local, state, and federal regulations.
WARNING! Always use both hands to remove and carry an HP Waste Ink Bottle.
Keep the HP Waste Ink Bottle upright. Do not place on tables or shelves where it could fall.
HP Cap Cleaning Kit with Roller
The HP Cap Cleaning Kit is used to clean and maintain the capping unit. The HP Cap Cleaning Liquid
comes packs of six bottles of cleaning liquid.
HP 780 Wiper Cleaning Liquid
The HP 780 Wiper Cleaning Liquid is used to clean and maintain the wiper blades.
HP Cleaning Swabs
HP Cleaning Swabs are used for cleaning your printer parts. They are specifically designed to avoid
damage to your printer. They are designed not to leave particles or fibers on your printer when you perform
cleaning procedures.
158 Chapter 12 Tell me about the ink system ENWW
Tell me about the ink
syst
em