HP Color LaserJet CM6030CM6040 Multifunction Printer series - Manual (Page 45)

Management menu
Administration > Management
Use this menu to set up global device-management options.
NOTE: Values shown with "(default)" are the factory-default values. Some menu items have no default.
Table 2-9 Management menu
Menu item Sub-menu item Values Description
Network Address Button Display
Hide (default)
Use this feature to display the Network Address button
on the Home screen.
Stored Job Management Quick Copy Job Storage
Limit Select the maximum
number of jobs to store Use this menu to view and manage any jobs that are
stored on the device.
Quick Copy Job Held
Timeout Off (default)
1 Hour
4 Hours
1 Day
1 Week
Sleep mode Disable
Use Sleep Delay (default)
Use this feature to customize the sleep mode settings
for this device.
Select Use Sleep Delay to set the device to enter sleep
mode after the delay that is specified in the Time/
Scheduling menu.
Manage Supplies Replace Supplies Stop at low
Stop at out (default)
Override at out 1
Override at out 2
This menu sets the product behavior for when a print
cartridge, fuser kit, or transfer kit is low. Choose
Stop
at low to stop printing when a supply reaches a low
condition. Choose Stop at out to allow the product to
continue printing until a color print cartridge is empty.
Choose Override at out 1 to allow the product to
continue printing when the cartridges are empty or
when the other supplies are worn out. The product
stops printing when the toner collection units are full.
Using this option could reduce print quality.
Choose Override at out 2 to allow the product to keep
printing when the cartridges are empty; when other
supplies are worn out; and when the waste toner
collection units are full. Using this option can damage
the device.
Supply Low/Order
Threshold Select a value in the
range. The default is 5%. Use this menu to carry out administrative supply
management tasks such as changing the threshold
when supplies should be ordered.
Color Supply Out Stop (default)
Auto-continue black
This menu sets the product behavior when a color
supply is empty. When
Auto-continue black is selected,
the product will continue printing using black toner only.
ENWW Management menu 29