HP Color LaserJet CM6030CM6040 Multifunction Printer series - Manual (Page 38)

Default Copy Options
Administration > Default Job Options > Default Copy Options
Table 2-4 Default Copy Options menu
Menu item Sub-menu item Values Description
Number of Copies Type the number of
copies. The factory
default setting is 1. Set the default number of copies for a copy job.
Number of Sides 1
2
Set the default number of sides for copies.
Color/Black Auto detect
Color
Black (default)
Choose whether the default copy mode is color or
black.
Staple/Collate Staple None (default)
One left angled
Two left
Two top
One right angled
Two right
Set up options for stapling and collating sets of copies.
If Collate is selected, the device prints a complete copy
before starting on the next copy. Otherwise, the device
prints the first page of all copies before printing the
second page, and so on.
The staple and collate feature may not be present in
your product. These features depend on the optional
output accessory installed.
Collate Off
On (default)
Output Bin Select the default output bin for copies.
This option is available only if an optional output
accessory is installed.
Edge-To-Edge Normal (recommended)
(default)
Edge-To-Edge Output
If the original document is printed close to the edges,
use the
Edge-To-Edge feature to avoid shadows along
the edges. Combine this feature with the Reduce/
Enlarge feature to ensure that the entire page appears
on the copies.
Auto Include Margins Off (default)
On
This feature automatically reduces the image size
during scanning so the margins are included.
22 Chapter 2 Control panel ENWW