HP X1800sb G2 Network Storage Blade - Manual (Page 31)

NOTE: To modify properties of the job, right-click the Restore Job Properties. For example,
you may want to choose a different device from which to restore or select different version of
files to restore. To restore version for files other than the latest backup, refer to Selecting Files
and File Versions in the HP StorageWorks Data Protector Express Users Guide and Technical
Reference.
5. Right-click the restore job and click Run to perform the restore.
6. Click Yes to confirm the restore.
To view the status of the restore job, click Job Status in the Favorites pane.
7. Exit Data Protector Express.
Setting the password for the ASMbackup user account
To set or change the ASMBackup user password:
1. Use the Command Line interface (CLI) found at C:\Program Files\HP\HP All-in-One
Storage Manager\hpkacli.exe
.
The password may be set interactively, allowing the password characters to be masked, or it
may be set with a single command.
2. Use the following command to display usage details:
> hpkacli /?
3. To specify a password, type the following:
> hpkacli set password
4. This will bring up the following:
Current password for ASMbackup:
New password for ASMbackup:
Confirm new password for ASMbackup:
5. If the current password for ASM backup is blank, press return when prompted. Otherwise,
enter the current password.
6. Confirm the new password by typing in password again under Confirm new password.
7. The password has been set.
Using the Administrator account to change the ASMbackup password
1. Use the Command Line interface (CLI) found at C:\Program Files\HP\HP All-in-One
Storage Manager\hpkacli.exe
2. Type in the following:
> hpkacli set password /admin
3. This will bring up the following:
Password of Admin user:
New password for ASMbackup:
Confirm new password for ASMbackup:
4. Type the Data Protector Express admin password.
5. Type the new password for the ASMbackup account.
6. Confirm the new password by typing it in again.
Managing backups 31