HP 8.20q Fibre Channel Switch - Manual (Page 80)

80 Managing switches
Table 16 describes the fields of the Call Home Setup dialog box.
Table 16 Call Home Setup fields
Field Description
Primary SMTP: (active)
(active)
indicates that the Primary SMTP (Simple Mail
Transfer Protocol) is the SMTP server that Call Home is
going to try to use when transmitting e-mail messages. Call
Home operates as an SMTP sending agent.
After any system configuration, the Primary SMTP server will
always become the active SMTP, provided it is enabled and
has a non-default address defined (0.0.0.0 is the default).
Primary SMTP Server
Address:
The IP address of the primary (first) SMTP server.
Primary SMTP Server Port: The service port number that the primary SMTP server is
listening on to accept connections from SMTP sending
agents.
Secondary SMTP: The second SMTP server. If the primary SMTP is not
enabled/defined, or if there is a failure in communicating
with the primary SMTP server, the Secondary SMTP server
will become the (active) SMTP server - the one used by Call
Home for the next attempt to transmit e-mail.
Secondary SMTP Server
Address:
The IP address of the secondary SMTP server.
Secondary SMTP Server
Port:
The service port number that the secondary SMTP server is
listening on to accept connection from SMTP sending
agents.
Contact Email Address: The e-mail address of the point-of-contact for the switch. This
e-mail address will be included in the text of e-mail
messages using the FullText format under the section for
Contact Information.
Phone Number: The phone number of the point-of-contact for the switch. This
value will be included in the text of e-mail messages using
the FullText format under the section for Contact Information.
Street Address: The address of the point-of-contact for the switch. This value
will be included in the text of e-mail messages using the
FullText format under the section for Contact Information.