beautypg.com

Alerts panel, Figure 4 alerts panel, 4 alerts panel – HP 8.20q Fibre Channel Switch User Manual

Page 16

background image

16

Using QuickTools

Devices—Displays information about devices (hosts and storage targets) connected to the switch. See

Devices data window

” on page 32 for more information.

Switch—Displays current network and switch configuration data for the selected switch. See ”

Switch

data window

” on page 49 for more information.

Port Statistics—Displays performance data for the selected ports. See

Port Statistics data window

” on

page 92 for more information.

Port Information—Displays information for the selected ports. See

Port Information data window

” on

page 89 for more information.

Configured Zonesets—Displays all zonesets, zones, and zone membership in the zoning database. A

zone is a named group of ports or devices. See

Configured Zonesets data window

” on page 36 for

more information.

Active Zoneset—Displays the active zoneset for the fabric including zones and their member ports. See

Active Zoneset data window

” on page 35 for more information about this data window. See ”

Zoning

on page 35 for information about zonesets and zones.

Alerts panel

The Alerts panel shows all reasons for status, including faults. The Alerts panel entries are the highlighted

rows between the faceplate image and the data window entries.

NOTE:

The up/down arrows on the divider bar between the Alerts panel entries and data windows

enable you to move the divider bar up or down incrementally. With the faceplate image in the graphic

window and the data window displayed, click the up arrow (on left) to move the divider up to the top of

the window, completely hiding the faceplate image. Click the down arrow (on right) to move the divider

back to the middle; click the down arrow again to completely hide the data window. You can also

click-and-drag the divider bar to manually move it up or down.

Figure 4

Alerts panel

Status section