HP 8.20q Fibre Channel Switch User Manual
Page 53

8/20q Fibre Channel Switch QuickTools switch management user guide
53
SSH Enabled
Secure Shell status. If Enabled, an encrypted data path is
provided for command line interface sessions.
SSL Enabled
Secure Sockets Layer status. If enabled, encryption for switch
management web applet and CIM sessions is provided.
CIM Enabled
Common Interface Model status. The CIM agent is based on
the Storage Networking Industry Association (SNIA) Storage
Management Initiative Specification (SMI-S), which is the
standard for SAN management in a heterogeneous
environment.
FTP Enabled
FTP status Enabled or Disabled.
Management Server
Enabled
Management server status Enabled or Disabled.
SNMP Enabled
SNMP status, Enabled or Disabled.
Call Home Enabled
Call Home status. If enabled and configured, switches can
send alerts to pagers and e-mail. Users can configure the
type of events and where the alerts are sent.
Zones/Security Group
Interop Mode
Standard
Legacy Address Format
None
Merge Auto Save
If Enabled, any zoning updates from the fabric will be saved
in permanent (non-volatile) memory as well as temporary
memory. If Disabled, any zoning updates from the fabric will
be saved only in temporary memory and will be lost after a
switch reset.
Default Zone
Enables or disables communication between ports and
devices not defined in the active zoneset, or when there is
no active zoneset.
Discard Inactive
Automatically removes the previously active zoneset when a
zoneset is activated on a switch.
Implicit Hard Zoning
Introduces hardware enforcement of zoning regardless of
type. All zones and all supported zone member types will
have hardware enforcement.
Security Auto Save
Enable to automatically save security settings to permanent
memory on the switch.
Security Fabric Binding
Enabled
If Enabled, the expected domain ID of a switch is required
before the switch can be attached to the fabric.
Advanced Group
R_A_TOV
Resource allocation timeout value (in milliseconds)
E_D_TOV
Error detect timeout value (in milliseconds)
Number of Donor Groups
Total number of donor port groups. A donor group is a set
of ports on a switch that can donate buffer credits to one
another.
Table 9
Switch data window fields
Field
Description