beautypg.com

Figure 28 system services dialog box, 28 system services dialog box, Figure 28 – HP 8.20q Fibre Channel Switch User Manual

Page 63

background image

8/20q Fibre Channel Switch QuickTools switch management user guide

63

command line interface, Network Time Protocol (NTP), Common Information Model (CIM), and Call

Home. To display the System Services dialog box, select Switch > Services.

Figure 28

System Services dialog box

IMPORTANT:

Use caution when disabling the Embedded GUI, GUI Mgmt, and Telnet, as it is possible to

disable all access to the switch except through a serial connection.

The following system services are available:

Embedded GUI (Graphical User Interface)—Allows users to point a browser at the switch and use the

QuickTools web applet.

GUI Mgmt—Allows out-of-band management of the switch from the switch management application

(GUI). If disabled, the switch can not be specified as the entry switch for a fabric in the GUI, but can

still be managed through an in-band connection.

Telnet (Command line interface)—Allows users to manage the switch through a Telnet command line

interface session. Disabling Telnet access to the switch is not recommended.

SNMP (Simple Network Management Protocol)—Allows management of the switch through third-party

applications that use SNMP.

NTP (Network Time Protocol)—Allows the switch to obtain its time and date settings from an NTP

server. Configuring all of your switches and your workstations to utilize NTP will keep their date/time

settings in sync and will prevent difficulties with SSL certificates and event logs.

CIM (Common Information Model)—Allows management of the switch through third-party applications

that use CIM.

FTP (File Transfer Protocol)—allows file transfers to the switch via FTP. FTP is required for out-of-band

firmware uploads which will complete faster than in-band Firmware uploads.

Management Server—Allows management of the switch through third-party applications that use the

GS-3 Management Server.

Call Home—Allows you to configure switches can send alerts and events to e-mail addresses or

pagers. This e-mail-based Call Home cannot be used to contact HP Services. Call Home to HP Services

can be accomplished using HP Service Essentials Remote Support Pack as described in the HP

StorageWorks 8/20q Fibre Channel Switch installation and reference guide.