Restoring the factory default configuration, Table 15 factory default configuration settings, 15 factory default configuration settings – HP 8.20q Fibre Channel Switch User Manual
Page 75

8/20q Fibre Channel Switch QuickTools switch management user guide
75
5.
If you select the Configured Zoning or Full Restore option and the file contains zonesets, a dialog box
prompts you to activate one of those zonesets. Click Yes, and then select a zoneset from the drop-down
list in the Select Zoneset to be Activated dialog box.
6.
Click OK and view the results in the top pane of the Restore dialog box.
Restoring the factory default configuration
You can restore the switch and port configuration settings to the factory default values. To restore the
factory configuration on a switch, select Switch > Restore Factory Defaults. The factory default switch
configuration settings are listed in
Restoring the switch to the factory default configuration does not restore the account name and password
settings. The most current port license will remain in effect. To restore user accounts, you must select the
Reset User Accounts to Default option in the maintenance menu. See “Recovering a Switch” in the HP
StorageWorks 8/20q Fibre Channel Switch installation and reference guide for your switch for information
about maintenance mode and the maintenance menu.
Table 15
Factory default configuration settings
Setting
Value
Symbolic Name
8/20q FC Switch
Administrative State
Online
Domain ID
1
Domain ID Lock
False
In-band Management
True
Broadcast Support
Enable
Resource Allocation Timeout
(R_A_TOV)
10000 milliseconds
I/O Stream Guard
Auto
Device Scan Enabled
True
Error Detect Timeout
(E_D_TOV)
2000 milliseconds
SNMP Enabled
True
SNMP Proxy
True
IP Address
10.0.0.1
FDMI Enabled
True
FDMI HBA Entry Level
1000
Subnet Mask Address
255.0.0.0
Gateway Address
10.0.0.254
Network Discovery
Static
Remote Logging
False
Remote Logging Host IP
Address
10.0.0.254
NTP Client Enabled
False
NTP Server IP Address
10.0.0.254
Contact
Undefined