HP LaserJet 5200 Printer series - Manual (Page 65)

Configuring trays
Load special print media, such as envelopes, labels, and transparencies, in tray 1 only. Load only paper
in tray 2.
Loading tray 1 (multipurpose tray)
Tray 1 holds up to 100 sheets of paper, up to 75 transparencies, up to 50 sheets of labels, or up to 10
envelopes. See the following sections for information about printing on special media:
● Preprinted material— Printing on letterhead, prepunched, or preprinted paper (single-sided)
on page 58
● Envelopes— Printing on envelopes on page 59
● Labels— Printing on labels on page 61
To load tray 1
1. Open tray 1 by pulling the front cover down.
2. Slide out the plastic tray extender. If the media that is being loaded is longer than 229 mm (9 in),
also flip open the additional tray extender.
ENWW Configuring trays 53