Clearable warnings, Auto continue, Clearable warnings auto continue – HP LaserJet 5200 Printer series User Manual
Page 51

To set the personality
1.
Press
Menu
to open the menus.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight SYSTEM SETUP, and then press .
4.
Press
to highlight PERSONALITY, and then press .
5.
Press
or
to select the appropriate personality, and then press .
6.
Press
Menu
to exit the menu.
Clearable warnings
Use this feature to determine the display time of control-panel clearable warnings by selecting ON or
JOB. The default value is JOB.
●
ON: Clearable warnings appear until you press .
●
JOB: Clearable warnings appear until the end of the job for which they were generated.
To set the clearable warnings
1.
Press
Menu
to open the menus.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight SYSTEM SETUP, and then press .
4.
Press
to highlight CLEARABLE WARNINGS, and then press .
5.
Press
or
to select the appropriate setting, and then press .
6.
Press
Menu
to exit the menu.
Auto continue
You can determine printer behavior when the system generates an auto-continuable error. ON is the
default setting.
●
Select ON if you want an error message to appear for 10 seconds before the printer automatically
continues to print.
●
Select OFF to pause printing any time an error message appears and until you press .
To set auto continue
1.
Press
Menu
to open the menus.
2.
Press
to highlight CONFIGURE DEVICE, and then press .
3.
Press
to highlight SYSTEM SETUP, and then press .
4.
Press
to highlight AUTO CONTINUE, and then press .
5.
Press
or
to select the appropriate setting, and then press .
6.
Press
Menu
to exit the menu.
ENWW
Changing printer-control-panel configuration settings
39