HP Smart Update Manager Version 6.0.0 - Manual (Page 7)

1 Introduction
HP SUM overview
HP SUM is a technology included in many HP products for installing and updating firmware and
software on HP ProLiant servers, and firmware on HP Integrity servers.
HP SUM provides a web-based GUI and a command-line scriptable interface for:
•
Deployment of firmware for single or one-to-many HP ProLiant and HP Integrity servers and
network-based targets such as iLO, OA, and VC Ethernet and Fibre Channel modules.
•
Deployment of software for single or one-to-many HP ProLiant servers (supported in Windows
and Linux environments).
HP SUM has an integrated hardware and software discovery engine that finds the installed hardware
and current versions of firmware and software in use on nodes you identify. HP SUM installs updates
in the correct order and ensures that all dependencies are met before deploying an update. HP
SUM prevents an installation if there are version-based dependencies that it cannot resolve.
Key features of HP SUM include:
•
Dependency checking, which ensures appropriate installation order and component readiness
•
Automatic and wizard-like Guided Update process
•
Web browser based application
•
Create custom baselines and ISOs
•
Assign specific baselines to nodes
•
Download updates from the web
•
Intelligent deployment of only required updates
•
Simultaneous firmware and software deployment for multiple remote nodes in GUI and CLI
modes
•
Improved deployment performance
•
Local online deployment of HP ProLiant servers and enclosures
•
Remote (one-to-many) online deployment of HP ProLiant and HP Integrity servers and enclosures
•
Local offline firmware deployments with HP Service Pack for ProLiant deliverables
•
Remote offline deployment when used with the SmartStart Scripting Toolkit (HP ProLiant G7
and earlier servers), Scripting Toolkit (HP ProLiant Gen8 and later), iLO Virtual Media, or PXE
booted media
•
GUI or CLI scripts with extensive logging
•
Remote command-line deployment
•
Support for updating firmware on network-based targets such as the OA, iLO through the
Network Management Port, VC Ethernet and Fibre Channel switches, and 3Gb/6Gb SAS BL
Switch interconnects on HP ProLiant servers
•
Support for deploying firmware updates to supported Integrity servers and Superdome 2
enclosures
•
Support for updating VC modules on Integrity servers
HP SUM overview 7