HP Smart Update Manager Version 6.0.0 - Manual (Page 21)

Deleting a baseline
HP SUM does not support deleting a baseline if it is associated with a node.
To delete a baseline:
1. On the Baseline Library screen, select a baseline.
2. Click Actions
→Delete.
NOTE: If the baseline is associated with one or more nodes, HP SUM displays a list of the
nodes. Edit the nodes to change the associated baseline, or delete the node. For more
information, see
“Editing a node” (page 25) or “Deleting a node” (page 28) .
3. Click Yes, delete to confirm that you want to delete the baseline.
Configuring components
Some components might have required or optional configuration settings. Configuration parameters
include information necessary to set up the component correctly or passwords required for software
installed by the component. The configuration is stored within the component and is propagated
to all nodes. If the optional configuration data of a component is not provided and the component
has not been installed previously, the default values for that configuration data are used. If the
component has been previously installed and configured and no changes are made to the
configuration data, the existing configuration information is preserved. Component configuration
requires that Smart Components are in a write-accessible location. A CD, DVD, or read-only network
share is not supported. You can change component options from the Baseline Library screen.
To configure components:
1. On the Baseline Library screen, scroll down to the list of components, and then click Needs
Configuration for each component you need to configure.
NOTE: Configuration options vary based on the component.
NOTE: HP SUM 6.0 does not support configuring components released prior to the HP SPP
2013.09.0. Use HP SUM 5.3.5 to update these components.
Using the Nodes screen
Nodes are hardware environment components. The Nodes screen displays the nodes that you
have added to HP SUM and HP SUM can manage. On the Nodes screen, HP SUM displays four
sets of information about the node:
•
General
•
Associated devices
•
Storage
•
NIC/FC-HBA/CNA
Using the Nodes screen 21