HP Smart Update Manager Version 6.0.0 - Manual (Page 41)

Description Overriding errors
do not have dependency failures. Force attempts all
updates, even if they have dependency failures.
Description Reboot options
If the following conditions are met, this argument causes
the server (or host server in a remote installation) to reboot: /r[eboot]
• The /reboot option is selected or given as a
command-line argument.
•
All components selected for installation are successfully
installed.
•
At least one of the installed components requires a
reboot to complete its installation.
Displays the specified reboot message on remote consoles
connected to the server that you want to reboot. You must /reboot_message "reboot message"
use this argument with the /reboot option, or the
argument is ignored.
Delays the reboot of the server for the length of time that
the timeout_in_seconds variable specifies. You must /reboot_delay timeout_in_secs
use this argument with the /reboot option, or the
argument is ignored. Acceptable values are between 15
and 3600.
• The default timeout value is 15 seconds for Microsoft
Windows operating systems and 60 seconds for Linux.
•
For Linux, the reboot delay time is converted from
seconds to minutes, and any value under a full minute
(59 seconds or less) rounds to the next minute.
If the following conditions are met, this argument forces
the server to reboot: /reboot_always
• The /reboot_always option is selected or given as
a command-line argument.
•
All components selected for installation are successfully
installed.
Description Simulating HP SUM
HP SUM 6.0 does not support this command. /dryrun
Description Nodes
Use this argument to log in to the remote nodes by using
the user ID. For the OA node, use the /oa_username
argument. /user or /username
The user name needs to belong to the root or administrator
group.
Use this argument to use this password for the user ID
specified in the /user parameter (except for the OA /password
HP SUM also supports passwd and pwd
node). The password is used to log in to remote nodes. For
the OA node, use the /oa_password argument.
Use root (super user) username to start a session, and
inventory and update components when the credentials /su_username
specified in /username and /passwd do not have root
privileges to update components.
Command-line interface 41