HP Laserjet 1200 - Manual (Page 74)

72 Chapter 5 Printing tasks EN
Manual duplex using the
output bin
1 Make sure that the straight-through
output door is closed.
2 Access the printer properties. See
Printer properties (driver) for
instructions. On the Finishing tab,
click Print on Both Sides, select the
Flip Pages Up check box, and click
OK. Print the document.
3 After side one has printed, remove
the remaining paper from the input
tray, and set it aside until after you
finish your manual duplexing job.
4 Gather the printed pages, turn the
printed side down, and straighten
the stack.
5 Place the stack back in the input tray.
Side one should be facing down with
the top edge toward the printer.
Replace the priority input tray.
Click OK (on screen), and wait for
side two to print.
1
2
3
4