Curl or wave, Page skew, Wrinkles or creases – HP Laserjet 1200 User Manual
Page 125
EN
Improving print quality 123
Page skew
●
Make sure that the media is loaded correctly and the media
guides are not too tight or too loose against the media stack.
See
Loading media into the input trays
for more information.
●
The input bin might be too full. See
●
Check the media type and quality. See
for more information.
Curl or wave
●
Check the media type and quality. Both high temperature and
humidity cause media to curl. See
for more information.
●
The media might have been in the input tray too long. Turn
over the stack of media in the tray. Also, try rotating the
media 180° in the input tray.
●
Open the straight-through output door and try printing
straight through. See
for more
information.
●
The fuser temperature might be too high. Check Optimize
for: in the Paper tab of your printer driver, and make sure
that it is set to the appropriate media.
Wrinkles or creases
●
Make sure that media is loaded properly. See
for more information.
●
Check the media type and quality. See
for more information.
●
Open the straight-through output door and try printing
straight through. See
for more
information.
●
Turn over the stack of media in the tray. Also, try rotating the
media 180° in the input tray.