HP Laserjet 1200 - Manual (Page 177)

EN Understanding the print server configuration page 175
Domain Name The Domain Name System (DNS) name of the domain where
the print server resides (for example, support.company.com).
It is not the fully qualified DNS name because the host printer
name is not included (for example,
printer1.support.company.com).
Not Specified: A domain name has not been configured on
the print server.
DNS Server The IP address of the Domain Name System (DNS) server.
Not Specified: A DNS server’s IP address has not been
configured on the print server.
WINS Server The IP address of the Windows Internet Name Service
(WINS) server.
Not Specified: A WINS server’s IP address has not been
configured on the print server.
Syslog Server The IP address of the syslog server configured on the print
server.
Not Specified: A syslog server has not been configured.
Idle Timeout The timeout value, expressed in seconds, after which the print
server closes an idle TCP print data connection. Acceptable
values are integers between 0 and 3600 seconds. A value of
zero turns the timeout mechanism off. The default is 90
seconds.
SLP Specifies if the print server sends Service Location Protocol
(SLP) packets used by system applications for automated
installation.
Enabled: The print server sends SLP packets.
Disabled: The print server does not send SLP packets.
Access List Specifies if a host access control list is configured on the print
server. A host access control list specifies the IP address of
individual systems, or IP network of systems, that are allowed
access to the print server and device.
Specified: A host access list is configured on the print server.
Not Specified: A host access list is not configured on the
print server. All systems are allowed access.
Message Description