HP Laserjet 1200 - Manual (Page 137)

EN Changing the printer separation pad 135
5 Reach in through the opening, push
the spring-loaded base down with
one hand, and pull the separation
pad up with the other hand.
6 With one hand, position the new
separation pad in the slot of the
previous separation pad (A). With
the other hand, reach through the
input tray opening, and push the
spring-loaded base down (B).
Note
The tab on the right is larger to help you
position it correctly.
7 Snap both sides of the separation
pad firmly into place.
CAUTION
Make sure that the separation pad is
straight and that there is no space
between the separation pad and the
spring-loaded base. If the separation
pad is not straight or you see space on
one side, remove the separation pad,
make sure that the larger tab is on the
right, reinsert the separation pad, and
snap both sides into place.
8 Reinsert the pickup roller, toner
cartridge, and input trays. Plug the
printer in to turn it back on.
5
6
7
8