HP Laserjet 1200 - Manual (Page 184)

182 Chapter 11 Troubleshooting the print server EN
42 INVALID IP ADDRESS The IP address specified for the print server (through BOOTP)
is an invalid IP address for specifying a single node. Check
your Bootptab file for the proper entries.
43 INVALID SUBNET MASK The IP subnet mask specified for the print server (through
BOOTP) is an invalid subnet mask. Check your Bootptab file
for the proper entries.
44 INVALID GATEWAY
ADDRESS
The default gateway IP address specified for the print server
(through BOOTP) is an invalid IP address for specifying a
single node. Check your Bootptab file for the proper entries.
45 INVALID SYSLOG
ADDRESS
The syslog server IP address specified for the print server
(through BOOTP) is an invalid IP address for specifying a
single node. Check your Bootptab file for the proper entries.
46 INVALID SERVER
ADDRESS
The TFTP server IP address specified for the print server
(through BOOTP) is an invalid IP address for specifying a
single node. Check your Bootptab file for the proper entries.
47 INVALID TRAP DEST
ADDRESS
One of the SNMP trap (Trap PDU) destination IP addresses
specified for the print server (through TFTP) is an invalid IP
address for specifying a single node. Check your TFTP
configuration file.
48 CF ERR – FILE
INCOMPLETE
The TFTP configuration file contained an incomplete last line
that did not end in a new line character.
49 CF ERR – LINE TOO
LONG
A line being processed in the TFTP configuration file was
longer than the print server could accept.
4A CF ERR – UNKNOWN
KEYWORD
A TFTP configuration file line contained an unknown keyword.
4B CF ERR – MISSING
PARAMETER
A line in the TFTP configuration file was missing a required
parameter.
4C CF ERR – INVALID
PARAMETER
One of the parameters on a line in the TFTP configuration file
contained an invalid value.
Error Code and Message Description