HP Laserjet 1200 - Manual (Page 161)

EN Removing the copier/scanner 159
Removing the copier/scanner
To remove the copier/scanner from the
printer, follow the instructions below:
CAUTION
If you remove the copier/scanner before
you unplug the printer, you might
damage your printer and scanner. You
must also unplug the printer before you
reinstall the copier/scanner on the
printer.
1 Turn off the power switch (220 v
models only) and unplug the printer.
2 Open and remove the left side panel.
3 Pull up on the scanner cable to
disconnect it from the printer.
4 Slide the copier/scanner up and
away from the printer.
Continued on next page.
1
2
3
4