AMX NetLinx Master-Ethernet Card/Module NXC-ME260 - Manual (Page 47)

NetLinx Security and Web Server
41 NetLinx Integrated Controllers
Security tab - Group Directory Associations page
The Groups > Directory Associations link allows an authorized user to view current directory
associations assigned to the selected group, add paths for new directory associations, and delete any
previously configured directory associations (FIG. 29).
A Directory Association is a path that defines the directories and files a particular user or group can
access via the Web Server on the NetLinx Master. This character string can range from 1 to 128
alpha-numeric characters. This string is case sensitive. This is the path to the file or directory to
which you want to grant access.
A single '/' is sufficient to grant access to all files and directories in the user directory and
subdirectory. The '/*' wildcard can also be added to enable access to all files. All entries should start
with a '/'.
Modify Group Entries (Cont.)
HTTP Access This selection enables or disables Web Server access for the
selected group.
Telnet Access This selection enables or disables Telnet Security for the selected
group.
Security Config Access This selection enables or disables the ability of a group to alter
the Security Configuration settings.
OK/Cancel/Delete • Press OK to accept any changes made within this tab and
incorporate the information into the target Master.
• Press Cancel to void any changes made within this tab,
disables the security configuration session, voids any changes
made to the Master, and returns you to the empty Security tab.
• Press Delete to remove the selected group from the list of
authorized groups on the Master.
FIG. 29 Security Tab - Group Directory Associations
Directories pathnames
present on the target
Master